这是 OEM Factory 工厂出海 模板的演示页（示例内容，非真实企业） ← 返回模板市场用这套模板建站 Home Get a Quote Factory Tour Products

示例企业

OEM / ODM · METAL & PLASTIC PARTS

Precision Manufacturing,
From Drawing to Shipped Parts

示例企业 is an ISO-certified OEM factory producing custom metal and plastic parts — laser cutting, CNC machining, bending, welding and surface finishing under one roof, with export documentation handled end to end.

Request a Quote View Capabilities

±0.02mm machining tolerance

20mm max carbon-steel cutting

7days prototype lead time

24hRFQ response time

About 示例企业

OEM & ODM: drawings, samples or 3D models all accepted

示例企业 is a 6,800 m² factory equipped with fiber laser cutters, CNC machining centers, press brakes, welding lines and CMM inspection, running two shifts for export orders.

Every batch starts with first-article inspection: dimensions and finish are confirmed before mass production, and critical dimensions ship with inspection reports for your incoming QC.

Company Profile

Founded2011

Factory Area6,800 m²

Main EquipmentLaser / CNC / Brake / Welders

MaterialsStainless · Aluminum · Carbon Steel · Titanium

InspectionCMM · Vision System · Hardness Tester

Typical Lead Time3–15 days for prototypes

Six Processes, One Factory

Cutting, forming, welding, finishing and inspection under one roof — no outsourcing round-trips

Laser Cutting

Fiber laser cutting with smooth edges and minimal distortion; ideal for batch nesting and one-shot custom profiles.

Carbon steel 0.5–20 mm

CNC Machining

3- and 4-axis machining centers for milling, drilling and tapping; suited to tight-tolerance parts and batches.

Tolerance ±0.02 mm

Sheet Metal Forming

CNC press brakes form to your flat pattern with angle compensation; enclosures and frames done in one pass.

Up to 3,200 mm

Welding & Structures

TIG, MIG and spot welding for frames, guards and containers, with post-weld grinding and straightening.

SS / Alu / Carbon steel

Metal materials and surface-finished parts

Surface Finishing

Sandblasting, brushing, anodizing, powder coating and plating, with film-thickness and adhesion checks.

Anodize / Blast / Coating

Dimensional inspection of precision metal parts

Precision Inspection

Full-dimension inspection by CMM and vision systems; reports ship with every delivery.

Full traceability

Common Materials & Processing Notes

The first question every buyer asks: can you work with this material?

Material / Grade	Category	Processable Thickness / Spec	Typical Applications	Processing Notes
304 / 316L	Austenitic stainless steel	0.5–20 mm sheet · Ø6–300 bar	Food equipment · Chemical containers · Medical devices	Low speed, high feed; avoid work hardening
430	Economy stainless steel	0.5–12 mm sheet	Decorative parts · Kitchenware · Housings	Keep tools sharp; clear chips early
6061	Aluminum alloy	1–25 mm sheet · profiles	Frames · Jigs · Electronic heatsinks	High-speed cutting; watch for built-up edge
7075	Ultra-hard aluminum alloy	5–120 mm plate	Aerospace parts · High-strength structures	Rigid fixturing; control cutting heat
Q235 / A36	Carbon structural steel	1–30 mm plate · sections	Machine bases · Embedded parts	Standard parameters; de-rust before welding
TC4 / Gr5	Titanium alloy	2–60 mm plate · Ø10–150 bar	Aerospace · Medical implants · Corrosion-resistant parts	Low speed, heavy coolant; avoid sparks
H62 / C28000	Brass	1–40 mm sheet · Ø5–120 bar	Conductive parts · Valves · Decor	Free-cutting; deburr carefully
SPCC / SGCC	Cold-rolled / galvanized sheet	0.5–3 mm sheet	Enclosures · Panels · Brackets	Check coating cracking before bending

Grades above are common examples — replace them with the materials and spec ranges your factory actually runs.

Machining Capabilities

Sample parameters below — replace with your actual equipment specs

Max laser cutting format	3,000 × 1,500 mm
Carbon steel cutting thickness	0.5–20 mm
Stainless cutting thickness	0.5–12 mm
Aluminum cutting thickness	1–25 mm
CNC travel	1,100 × 600 × 600 mm
General tolerance	±0.02 mm
Max bending length	3,200 mm
Max bending tonnage	160 T
Welding processes	TIG / MIG / spot
Surface finishing	Blasting · Brushing · Anodizing · Powder coating

Capacity at a Glance

Capacity and delivery figures are samples — replace with real data

6,800m² factory area

86skilled workers on staff

120tons monthly output

98.6% first-pass acceptance rate

Drawing to Shipped Parts in Five Steps

Every step leaves a record — issues trace back to the operation and the operator

Send Drawings / Samples

Email your drawings, 3D models or physical samples with material, quantity and target date.

DFM Review & Quotation

We confirm feasibility and process route, then quote a breakdown of material, operations and unit price.

Prototype & First-Article Approval

A first article ships with inspection records; mass production starts only after your approval.

Mass Production

Cutting, machining, welding and finishing run to schedule, with checkpoints at critical operations.

Inspection & Delivery

Final inspection before packing; reports ship with the goods by sea, air or express.

Steps and timelines are samples — adjust to your actual workflow; delivery commitments are governed by contract.

Certifications & Commitments

If you have no public certifications, this section can be turned off in the dashboard

✓ISO 9001:2015Quality management system certified

✓NDA on RequestDrawings & process files never shared

✓Reports Ship with GoodsFull-dimension records of critical sizes

✓Contract-FirstSpecs, milestones and penalties in writing

Send Us Your Drawings — DFM Review & Quote Within 24 Hours

We accept drawings, samples and 3D models. Prototype and mass production are both welcome; our engineers reply with process feasibility and lead time on working days.

Get a Quote Now

Precision Manufacturing,From Drawing to Shipped Parts